top of page

LOCK INSTRUCTIONS

HOW TO SET YOUR PERSONAL COMBINATION

NOTE: Each Hostry Box is factory set at  “0-0-0”

STEP 1.   Combination must be on > 0-0-0 < prior to resetting.

STEP 2.   On the underside outer edge of the lock there is a hole for the code reset button. Rotate the face of lock until the code reset hole comes into view.

STEP 3.   Push the pin inside the hole with a paper clip or included key and "keep it pushed in".

*IMPORTANT: Make sure to keep the pin pushed in firmly at all times- if the key or clip are not pushed in or come loose while you are turning dials- you will lose your lock combination and render the lock and machine useless.

STEP 4.   Set your personal combination by turning the dials

to the desired 3-digit combination.

We HIGHLY recommend  changing only one number/dial from the original factory code to avoid lock maintenance issues - i.e., number sets such as   0 0 3   -   0 4 0   -   2 0 0   -   0 6 0   -   0 1 0,  etc. 

Once your number is chosen - you may then release the pin

STEP 5.   Release the reset button by removing the lock key or paper clip and your combination is set.

**DO NOT RELEASE PIN WHILE SETTING**

*Must keep this pushed in at all times until the desired number is set

STEP 6.   To lock, rotate lock to “locked” position. Rotate one or more dials after lock is closed. To un-lock the lock, turn dials to your personal combination and rotate lock to the unlocked position. 

**MAKE SURE TO WRITE YOUR COMBINATION DOWN IN A SAFE PLACE SO YOU DON’T FORGET IT**

bottom of page